A vehicle wrap is a large vinyl graphic decal that is applied over the paint of a vehicle. That could be anything ranging from a car, truck, van, box truck, semi, trailer, or even a boat!

At WrapJax, we proudly use 3M wrap films for our wraps to ensure the best product for our clients.

Vehicle wraps, including bus wraps and fleet wraps, are comprised of three phases. The first is the design phase which includes getting accurate measurements for the vehicle and the actual design of the graphics to be applied. The second is the production phase where the graphic is printed and then laminated to protect the vinyl from abrasion and UV rays that can cause graphics to fade over time. The third is an installation where the vinyl is actually applied to the vehicle. In some cases, there may be a fourth phase, the removal of the graphics if requested.

Anything less than a full wrap is normally called a “partial wrap.” A half wrap normally includes the entire rear of the vehicle and halfway up the sides of the vehicle and often includes a hood logo. A three-quarter wrap normally includes the entire rear of the vehicle and most of the entire sides of the vehicle and often includes a hood logo. Typically, a full wrap includes the entire surface of the vehicle, which may or may not include the roof.

Normally, you can expect a wrap to last between 4-7 years. The life of your wrap depends on many factors, which include (but are not limited to) weather, how it is maintained, and how a vehicle is stored. Window perforated wrap material will typically last 2-3 years and can easily be re-installed to match your vehicle wrap.

In most cases, vehicle wraps will not damage factory paint jobs. Paint or clear coats in poor condition may peel when vinyl is removed. WrapJax™ is not liable for damage to paint upon installation or removal.

Yes. All vehicles must be free of dust, mud, wax, oil, Armor-All, and other agents that may prevent the vinyl from adhering to the paint surface. It is important that all vehicles must be washed prior to delivery at a WrapJax™ location for graphics installation. Vehicles dropped off without being washed may be subject to a $50 Prep Fee and may require us to drive your vehicle off-premises to a wash facility. WrapJax is not liable for damage to the Vehicle throughout this process”

Please review your scheduling needs with a WrapJax Scheduler.

1. Once we receive your Design Fee, you should receive an initial layout from your designer within 4-7 working days. Your WrapJax™ designer will work with you to ensure your project meets your design & color requirements. Modifications and adjustments can take anywhere from same-day fulfillment or up to 2 business days. It is important to give your designer as much information at the time of request as possible so that he/she can efficiently process your design changes.

2. Depending on our production schedule, it might take up to 7 or more days for the production of the final product. Once your project is in our production Queue, we will have a scheduler contact you for installation scheduling.

Yes. You can normally have the damaged pieces or panels of your vehicle wrap replaced after your vehicle is repaired. You normally do not need to redo the entire wrap if the damage is limited to certain areas of the vehicle. It is important to note that matching the color can be a factor in printing a repair panel for your wrap. This is not due to fading but rather it is due to printer heads being replaced which can slightly alter color settings. It may be necessary to print a test sample prior to a production panel. Test samples are charged at a rate of $25 each until a match can be made.

You must always obtain permission to wrap a leased or rented vehicle. However, in general, most leased or rented vehicles have factory paint jobs with excellent paint quality. Vinyl applied over factory paint is best because the vinyl can be removed easier without damage or “paint peel.” Leased vehicles are often wrapped throughout the country without incident or damage.

Hand washing is best. Try to avoid high-pressure washes and be careful never to use an ice scraper on window graphics. There are specially designed products to clean and polish vinyl graphics and we proudly offer our own line of cleaning products under our Wash Sauce brand. We will be happy to tell you about them.

There are several things to consider: design time, materials (including vinyl and lamination), print, and installation. The size of the vehicle to be wrapped and the type of vehicle also play a part in cost. In general, vehicles with compound curves like a VW Bug or PT Cruiser, are more difficult and more expensive to wrap than a vehicle with less contour. Partial wraps are a great way to minimize cost as opposed to a full wrap if the color of the vehicle can be utilized in the design and color scheme of your branding. Cast (High performance) vinyl is more expensive than Calendared (Intermediate) vinyl but lasts longer, so be sure to ask for details.

If you are using a vehicle wrap as signage or for marketing purposes, there is no more cost-effective advertising method available. It has been proven that the cost per impression (CPI) of vehicle wraps is dramatically less than other forms of advertising such as billboards, television, radio, and yellow pages. If you are using your vehicle wrap to improve the appearance of your vehicle, digitally printed vehicle wraps simply cannot be duplicated by more traditional methods like paint or airbrushing.

Yes, in most cases. The vinyl used for vehicle wraps is designed to be removed with no residue. If the vehicle’s paint is old or peeling, it might peel up with the vinyl when it is removed. Most factory paint and clearcoat provide a durable surface for application and will typically be flawless when a wrap is removed. WrapJax™ is not liable for damage to paint or clearcoat during installation or removal.

Yes! You can see through window graphics that are printed on window film. Window perf vinyl is perforated with small holes that allow you visibility from inside the vehicle but allow your printed message to be visible from the exterior of the vehicle.

WrapJax tries to make it easy for our clients to work with us. We accept cash, most major credit cards, and Net 30 for large accounts.

Cash is accepted in US Funds only. WrapJax pays cash customers sales tax.

Credit Cards are accepted – WrapJax will gladly accept credit cards for projects. Cards must be swiped and signed for or a processing fee of up to 3% will be automatically applied to your invoice.

Financing is available to all customers over the age of 18. Interest rates are solely based on the individual applicants credit history.

Net 30- WrapJax will gladly allow Net 30 terms for high-volume accounts. A 50% deposit will be required for new clients wishing to establish Net 30 terms for future billing.

Our file preferences call for PhotoShop (.psd files) and/or Adobe Illustrator (.ai files) submitted via Dropbox or uploaded to an FTP account. If you are working within specific color metrics, please provide your WrapJax designer any PMS (Pantone) color codes that are required for your project. WrapJax™ has a Pantone book at each location if you wish to check color. Pantone books may not be taken from the premises.

WrapJax keeps our approved client artwork archived on the cloud for future needs. As a matter of fact, we are proud of the fact that we still have the original files from our very first customer stored safely on the cloud to this day!

Clients do not own the artwork or layouts that WrapJax designers have created for the express purpose of producing their vehicle wrap with WrapJax. All artwork is the creative property of WrapJax and will be available for our clients if another vehicle wrap is needed or if their vehicle wrap has somehow become damaged due to an accident or vandalism.

Art files can be made available for purchase at an additional fee based on the complexity of your project. Most files can be purchased from WrapJax at prices as low at $950.

In most cases, a black or dark gray vehicle is preferred because it provides a good backdrop that is complimentary to most wraps regardless of whether it is printed or a solid color.

Although, it is important to note that any base color on a vehicle can be wrapped these two colors can also help avoid the need to add costly options such as wrapping door jambs and down into the engine and trunk wells.

WrapJax requires an initial up-front Design Fee based upon the type of wrap you wish to have produced and installed on your vehicle. This fee can range anywhere from $159 to $769, with the average design fee costing somewhere between $279-$359 (plus sales tax).

WrapJax designers spend a great deal of time and effort creating a custom-made layout for your project. It will be important that you maintain contact with your designer and based on the level of design package you were charged you will have a certain number of revisions that can be requested before accruing additional change orders therefor it is critical that you are concise with your changes and batch them together in as few separate requests as possible.

REMINDER:
If your project is placed on hold for any reason, WrapJax will honor the pricing you were quoted for up to 6 months. Your design fee will be valid for up to 12 months from the time it was paid until it expires and a new charge will be required if you wish to pick up your project again. If you have any questions about your design fee, please ask your WrapJax representative.